Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Miami, FL
Gate repair in Miami means working on equipment that has been baked by the sun, scoured by salt air, and occasionally punched by hurricane debris. Most of our calls come from gated communities and concrete-block homes where the gate is the first thing a visitor touches and the last line of privacy for the homeowner. Whether it’s a crept swing gate on a Coral Gables driveway or a dead operator on a Kendall side entrance, we quote the work in writing before we start and we stand behind the repair for a full year. Call (850) 409-8032 and a live person picks up, any hour.
Why Miami Homes Are Different
Miami’s housing stock doesn’t behave like other Florida cities. We work on a lot of post-1950 concrete-block and stucco homes with driveway gates that are bolted into block walls rather than wood posts, which changes how we anchor a new operator or re-hang a sagging leaf. In older neighborhoods like Coral Gables, Shenandoah, and the Roads, custom wrought iron gates often sit on submerged hydraulic operators that the original installer buried decades ago. Parts for those systems aren’t on a shelf anywhere, so we either scavenge what’s still sound or convert the gate to a modern above-ground actuator, which is the motorized arm that physically pushes the gate open and closed.
The climate is the other constant. Salt-laden air off the Atlantic eats at hinges, bearings, and control boards faster than inland crews ever see. Intense UV fades powder coating and makes plastic limit-switch housings brittle. Then there’s hurricane season: wind-driven rain finds its way into control boxes, and flying debris bends gate frames or knocks wheels off their tracks. After a storm passes, gate technicians get as busy as roofers, and we’re used to that rhythm.
Styles & brands we work with
Our Main Miami Services
Three services cover almost every gate call we run in Miami, and each has its own page with local pricing and detail. Here’s what each one involves.
Gate Repair in Miami
Most gate repairs in Miami come down to a handful of failures: a welded hinge that cracked, an actuator that stopped mid-swing, a wheel that jumped a bent track, or a control board that got wet and gave up. We inspect the full run of the gate, quote the repair in writing, and do the work with parts we carry on the truck. Salt corrosion is the multiplier here: a hinge that would last years inland can crack in months near the water, so we check every wear point, not just the one that failed. Gate Repair in Miami covers typical costs and what we see most often by neighborhood.
Gate Installation in Miami
A new gate in Miami has to satisfy three masters: the wind load from hurricane season, the HOA’s design rules, and the salt air that punishes cheap steel. We measure the opening, match the gate to the material and finish that suit the home, and run a site check on the power and the ground before quoting anything. We don’t cut corners on posts or hinges, because Miami storms find the weak spot. Our installation work includes a written price before any fabrication begins and a written guarantee on the finished job. Gate Installation in Miami walks through what a full install includes and what it costs.
Electric Gate Repair in Miami
When the gate won’t open from the remote or the keypad, the problem is usually in the operator, the safety edges, or the low-voltage wiring between them. Miami’s humidity and salt air are hard on circuit boards; we regularly replace control boards that have corroded inside what looks like a sealed enclosure. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so the tech who arrives already knows the system’s wiring and programming. Electric Gate Repair in Miami covers the most common failures and their typical repair ranges.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Miami
We keep common parts on the truck for Mighty Mule, Ghost Controls, DoorKing, and Elite operators, which covers a large share of Miami’s residential gates. Programming and wiring for the bigger commercial systems we service, like LiftMaster and FAAC, is on our brands page. When we have the part locally, most repairs are done in a single visit.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Miami, FL
Every price below is a fair working range for Miami, quoted in writing before we touch a single bolt. What you agree to is what you pay.
| Service | Typical range in Miami |
|---|---|
| Swing gate hinge replacement (single) | $180 – $340 |
| Gate wheel or roller replacement | $120 – $250 |
| Swing gate actuator swap | $475 – $900 |
| Gate control board replacement | $260 – $550 |
| Keypad or remote programming | $75 – $160 |
| Safety sensor or photo-eye alignment | $95 – $180 |
| Bent track straightening (single section) | $220 – $425 |
| Welded repair on steel gate frame | $190 – $380 |
| Full gate removal and reset (re-hang) | $350 – $700 |
| Salvage/retrofit of legacy hydraulic operator | $600 – $1,200 |
What pushes a Miami price higher is usually salt corrosion that has spread past the visible failure, or an older gate that needs the operator retrofitted because the original parts are obsolete. We quote the full number before any work starts, and every repair invoice carries the Kingswell Guarantee in writing.
Neighborhoods We Serve in Miami
We run repair and installation crews throughout Miami, from the waterfront enclaves to the inland neighborhoods. Our typical first-available slot is same-day or next-morning depending on the part and the weather.
- Coral Gables
- Kendall
- Shenandoah
- The Roads
- Brickell
Service Area – Cities Near Miami
Beyond Miami proper, our crews also cover nearby communities north of the city. If you’re in North Miami Beach, FL and the gate won’t budge, the same crew, the same written quote, and the same 365-Day Done Right Promise apply. Call us and we’ll confirm the arrival window before the truck rolls.
Serving Miami, FL - Our Local Coverage Area
We’re based in the Miami area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Miami
Most Miami calls get a same-day or next-morning appointment, depending on the part and the season. After a hurricane or major storm, wait times lengthen because every gated community in the city is calling at once. If your gate is stuck open and the property is unsecured, tell the dispatcher and we’ll prioritize you. Call (850) 409-8032 for our first real opening.
Many Miami HOAs require written approval before a gate is replaced or its color or material changes, especially in gated communities with a uniform streetscape. A repair that keeps the existing gate and finish typically doesn’t trigger approval. We can work with your HOA’s spec sheet, but the approval itself sits between you and the board.
We cover Miami and the neighboring cities, including North Miami Beach. Dispatch and scheduling are coordinated from our South FL office, and crews serve Miami locally. If you’re inside the county and not sure, call (850) 409-8032 and we’ll tell you straight.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Miami Customers Say
"Hinge sheared off our heavy iron gate. They welded a new one on and it's sturdier than before. Showed up on time and cleaned the driveway after the welding."
- Rhonda Mikula"Good repair on a sagging gate and a new hinge welded on. Took them a couple days to get the part in, but they told me that up front and it's been solid since."
- Hector Villanueva"The gate works great now. Only thing is the first tech couldn't find the wiring fault and they had to send a second guy the next day. Second visit nailed it and they didn't charge me twice."
- Chuck Alderman